Clamp Meter, beli digital multimeter is a measuring device

Clamp Meter, beli digital multimeter is a measuring device that combines electrical digital multimeter with a basic flow sensor . Clamps measuring flow more familiar with the title pliers amperes . Probe to measure the voltage . Having a " jaw clamp " to be integrated into the electric meter enables users to clamp around the wire , cable and other conductors at any point and can measure the electrical system directly without the need to remove it .

What is measured by Clamp Meter ?

All of these types : AC current , AC and DC voltage , resistance , continuity , and , with some models , the DC current , capacitance , temperature , frequency and other Typically measure the nearest unit that makes it perfect for work in the electrical field.

Who is using it ?

• Industrial maintenance technician
• Industrial controls
• electrical System
• Commercial / HVAC industry

Used for what ?

Services : Repair system in accordance with the required
Installation : Installation troubleshooting , perform a series of final tests and supervise the installation of electrical current
Maintenance : Making maintenance schedule electro - mechanical systems

Why use a Clamp Meter ?

In the industrial world there are often calls for measuring systems that have problems , where they bring a lot of measuring instruments ie 2 for measuring electrical currents and measure voltage . For the technicians , clamp meter is a fast and versatile tools to find problems in the electrical system or equipment that is not operating properly .

What is the flow in ?

Large machines often require a large electric current to be worked by electricity must therefore ensure it can support the request. The wave is called inflow and it can cause other problems in addition to more than just supply the whole. FLUKE Clamp from using proprietary technology to filter out " noise " and the electric saw her as protection circuit .

What is the difference with the new clamp ?

Can help solve the problems :

• Narrow storage area and cable ties that complicate the use of clamp meters usual
• Conductor large and rigid so as to make a clamp meter can not measure overall
• Needing help other workers in the measurement
• Want to measure more than 1,000 amps AC

Read More

Fluke Indonesia | Ralali.com

Ralali adalah Agen sekaligus Distributor Fluke di Indonesia, barang - barang yang berkwalitas dan orisinillah yang kami sediakan, selain Fluke, Ralali juga masih banyak mempunyai brand - brand alat pengukuran, seperti hioki, trotec, pie, geotech, dan masih banyak lagi, ingin tahu apa saja yang kami jual, silahkan kunjungi

www.ralali.com

FLUKE Ti10 Thermal Imager Call Us FLUKE Ti25 Thermal Imager Rp 75.000.000 FLUKE Ti27 Industrial - Commercial Thermal Imager Call Us FLUKE 1507/1503 Insulation Resistance Testers Call Us FLUKE 1555 Insulation Resistance Tester Call Us FLUKE 1587 Insulation Multimeter Call Us FLUKE 87V Industrial Digital Multimeter Rp 4.250.000 FLUKE 376 True-RMS 1000A AC/DC Clamp Meter Rp 4.100.000 Distributor  : Fluke Indonesia | Ralali.com

Read More

agen fluke | Fluke 190 Series II scopemeter

The first four- and two-channel scopes built for CAT IV industrial environments

• Extend your arsenal of troubleshooting capabilities by visually inspecting signals amplitude, time, shape and disturbance or distortion characteristics.
• The Fluke 190 series combines the power of a high performance oscilloscope, multimeter and paperless recorder in an easy to use test tool you will come to rely on in the field.

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation.

As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V,
the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness, and portability.
You can choose from 60MHz, 100MHz, 200MHz or 500MHz bandwidth models,
with real-time sampling rates up to 5 GS/s and 200 ps resolution to capture noise and other disturbances.
Both models feature deep memory—up to 10,000 samples per channel— so you can examine very small parts of the waveform in detail.
And both are IP-51 rated to withstand dust, drips, humidity, and wide temperature variations.
Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.

Fix More with the Two and Four-Channel CAT IV Rated Fluke ScopeMeter 190 Series II

The Fluke ScopeMeter 190 Series II combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.

The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include amultimeter, TrendPlot  and ScopeRecord  roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

• Two or four electrically isolated inputs
• CAT III 1000V / CAT IV 600V safety rated
• Choose from 60 MHz, 100MHz, 200MHz or 500MHz bandwidth models
• Fast sampling rate, up to 5GS/s with up to 200 ps resolution (Depending on model and channels used)
• Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
• Dedicated 5000 Count digital multimeter in 2 Channel models
• Quad meter measurements via scope BNC inputs in 4 channel models
• Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
• ScopeRecord roll mode, capture waveform sample data for up to 48 hours
• TrendPlot, trend measurement readings for up to 22 days
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity
• Li-Ion battery for extended operating timespan
  • 190-X04, 4 Channel models up to 7 hour (BP291 included standard)
  • 190-XX2, 2 Channel models up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
  • Charge spare battery using optional external battery charger EBC290
• Easy-access battery door to make it easy to swap batteries
• A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

Specifications
Bandwidth	Fluke 190-502: 500 MHz Fluke 190-204: 200 MHz Fluke 190-202: 200 MHz Fluke 190-104: 100 MHz Fluke 190-102: 100 MHz Fluke 190-062: 60 MHz
Number of Channels	Fluke 190-502: 500 MHz: 2 channels Fluke 190-204: 200 MHz: 4 channels Fluke 190-202: 200 MHz: 2 channels Fluke 190-104: 100 MHz: 4 channels Fluke 190-102: 100 MHz: 2 channels Fluke 190-062: 60 MHz: 2 channels
Real-time sample rate	Fluke 190-502: 5 GS Fluke 190-204: 2.5 GS/s Fluke 190-202: 2.5 GS/s Fluke 190-104: 1.25 GS/s Fluke 190-102: 1.25 GS/s Fluke 190-062: 625 MS/s
Inputs	4 scope or 2 scope plus DMM input
Independently floating isolated inputs	Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
Timebase range	2 ns - 2 min/div (190-20X, 200 MHz models) 5 ns - 2 min/div (190-10X, 100 MHz models) 10 ns - 2 min/div (190-062, 60 MHz model)
Input sensitivity	2 mV-100 V/div
Trigger types	Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger Source	Any scope input channel, or external via DMM input on 190-XX2, 2 channel models
Glitch capture	8 ns
Scope measurements	Cursor: 7 Automatic: 30
Maximum record length	ScopeRecord mode: 30,000 pts Scope mode: 10,000 pts per input
Persistence	Digital persistence giving analog oscilloscope-like waveform decay
Waveform Compare	Waveform reference with automatic Pass/Fail testing

DMM Specification (2-channel models)
Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)	4 mm banana inputs, fully isolated from scope inputs and from scope ground
Maximum Resolution:	5000 counts
Measurements:	Vdc, Vac rms, Vac+dc rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature ºC or ºF (using optional converter)
Memory	190-XX2, 2 Channel Screen + Setup: 30 Recording: 10
Display	153 mm full color LCD with fast update rate

Environmental Specifications
Operating Temperature	0ºC to 40ºC Including Batteries 0ºC to 50ºC Excluding Batteries
Storage Temperature	-20°C to +60°C
Operating Altitude	Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V

Safety Specifications
Electrical Safety	1,000V CAT III/600V CAT IV (EN61010-1)

Mechanical & General Specifications
Size	270 x 190 x 70 mm
Weight	2.2 kg
Warranty	3-years on main instrument, 1-year on accessories
Li-Ion Battery	190-XX2, 2 Channel models 190 BP291 4800 mAh battery up to 7 Hours included standard

Included Accessories
Two channel models	VPS410 Voltage Probe Sets (one red, one blue) TL175 TwistGuard™ safety designed Test Lead Set (red and black) BC190 Battery Charger/mains Adapter BP290 2400 mAh Li-ion Battery Handstrap (affixed to instrument) Hangstrap Multi-Language User Manuals on CD-Rom FlukeView ScopeMeter demo package (restricted functionality) USB Interface Cable
Four channel models	VPS410 Voltage Probe Sets (one red, one blue, one grey, one green) BC190 Battery Charger/mains Adapter BP291 4800 mAh high capacity Li-ion Battery Handstrap (affixed to instrument) Hangstrap Multi-Language User Manuals on CD-Rom FlukeView ScopeMeter demo package (restricted functionality) USB Interface Cable
Warranty	Three years on main instrument, one year on accessories

Tags: alat ukur listrik, multimeter, fluke clamp meter, measuring instrument, test equipment, digital multi meter, digital meter,clamp meter, fluke price, harga fluke, jual fluke, fluke meter, distributor fluke, fluke digital multimeter, fluke indonesia, fluke,fluke multimeter, multi meter fluke, distributor Fluke, scopemeter, Fluke 190 Series II,

Read More

Multimeter Fluke 27 II/28 II Industrial

Multimeter Fluke 27 II/28 II Industrial

Lihat lainnya di www.ralali.com

Description

---

The NEW standard for ruggedThe NEW digital multimeters Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.

FEATURES

• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically
• Peak min-max (28 II)
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II)

SPESIFICATIONS

Accuracy specifications
DC voltage	Range 0.1 mV to 1000 V Accuracy 27-II:0.1 % +1 28-II:0.05 % + 1
AC voltage	Range 0.1 mV to 1000 V Accuracy 27-II: 0.5 % +3 28-II: 0.7 % +4
DC current	Range 0.1 μA to 10 A Accuracy 27-II: 0.2 % + 4 28-II: 0.2 % + 4
AC current	Range 0.1 μA to 10 A Accuracy 27-II: 1.5 % + 2 28-II: 1.0 % + 2
Resistance	Range 0.1 Ω to 50 MΩ
Display counts	27-II 6000 28-II 6000/19,999
Capacitance	1 nF to 9999 μF
Frequency	0.5 Hz to 199.99 kHz
Temperature	27-II: N/A 28-II: -200 °C to +1090 °C
Low pass filter (Measurement on VSD’s)	27-II: N/A 28-II: Yes
Compliance	CAT IV 600 V , CAT III 1000V
IP rating	27-II: IP 67 28-II: IP 67
Power	Three AA batteries
Battery life	800 hours

General specifications
Display	Bar graph/backlight Yes/Yes
Data storage	Peak transient capture 250 μS (28 II) Min/Max/Avg Yes Reading hold Yes
Other features	Relative readings (zero) Yes Battery type Three AA batteries
Warranty and protection	Safety rating CAT IV 600 V/CAT III 1000 V External protection Rubber holster Drop test 10 feet drop test Dustproof/waterproof Yes, IP 67 rated Warranty Limited lifetime Size (HxWxL) with holster 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in) Weight with holster 698.5 g (1.54 lb)

Distributed By : www.ralali.com ,Distributor FLUKE Indonesia

Read More

Power Analyzers Fluke Norma 4000/5000 High Precisi

AGEN ALAT LISTRIK

Power Analyzers Fluke Norma 4000/5000 High Precisi

Description

---

Reliable, highly accurate measurements for the test and development of power electronics

The compact Fluke Norma Series Power Analyzers provide the latest measurement technology to assist engineers with the development and testing of motors, inverters, lighting, power supplies, transformers and automotive components.

Based on a patented, high-bandwidth architecture, the instruments deliver high-precision measurements of single or three-phase current and voltage, harmonics analysis, Fast Fourier Transformation (FFT) analysis, as well as calculations of power and other derived values.

The Series consists of the Fluke Norma 4000 Three-Phase Power Analyzer and the Fluke Norma 5000 Six-Phase Power Analyzer. These rugged, high-precision analyzers provide unmatched price performance for easy and reliable use in the field, or as a bench unit in laboratories and on test benches.

APPLICATIONS

• Electric motors and inverter drive systems – Through detailed spectrum analysis and dynamic torque calculation capabilities, switching losses caused by the inverter are accurately measured, and a thorough evaluation is made of torque transients and harmonics at higher frequencies.
• Inverter drive system – Simultaneous measurement of all electrical and mechanical power parameters in the same time window enables users to observe the influence one component has on another, or on the whole system.
• Lighting systems – A wide bandwidth of up to 10 MHz and a high sampling rate up to 1 MHz provide detailed signal analysis at ballast outputs. A unique shunt technique enables power measurements at very high frequencies. Simultaneous measurement of input and output power provides instant calculation of ballast losses.
• Transformers – Synchronous six-phase power measurements enable highly accurate efficiency and loss calculations of large power transformers even at very low power factors. Synchronous multiphase resistance measurements of transformer coils are also possible.
• Automotive – Synchronous electrical input and mechanical output measurements provide complete data on the efficiency and losses of individual components as well as the whole drive system.

FEATURES

• Compact design makes it easy to carry and saves working space.
• Simple user interface ensures easy, intuitive operation.
• A variety of standard configurations allows users to choose the exact functionality required for their unique application.
• Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
• All inputs are galvanically isolated to avoid short circuits in all applications.
• Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
• FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
• User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
• 4 MB on-board memory (expandable to 128 MB) for storage of measured values.
• Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
• PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
• 341kHz or 1 MHz sample rates for detailed signal analysis.
• Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
• Fluke NormaView PC software for data download, analysis & report writing.

General Specifications
Number of Phases	Fluke Norma 4000: 1 to 3 Fluke Norma 5000: 3, 4 or 6
Weight	Fluke Norma 4000: Approx. 5 kg (11 lb.) Fluke Norma 5000: Approx. 7 kg (15 lb.)
Size	Fluke Norma 4000: 150 mm x 237 mm x 315 mm (5.9 in x 9.3 in x 12.4 in) Fluke Norma 5000: 150 mm x 447 mm x 315 mm (5.9 in x 17.6 in x 12.4 in)
On-board Printer	Fluke Norma 4000: No Fluke Norma 5000: Yes (optional)
Display	Color, 5.7“ / 144 mm - 320 x 240 pixel User-selectable background lighting and contrast.
Bandwidth	dc to 3MHz or dc to 10MHz depending on input module
Basic Accuracy	0.2%, 0.1% or 0.03% depending on input modules
Sampling Rate	0.33 MHz or 1 MHz depending on input modules
Voltage Input Range	0.3 V to 1000 V
Current Input Range (direct, not via shunt)	0.03 mA to 20 A depending on input module
Memory for Configurations	4 MB
Memory for Settings	0.5 MB
Fast Fourier Transformation (FFT)	To the 40th harmonic
RS232/USB Interface	Standard
PI1 Process interface (8 analog/impulse inputs and 4 analog outputs)	Optional
IEEE 488.2/GPIB interface (1 MBit/s Ethernet / 10 MBit/s or 100 MBit/s)	Optional
Fluke NormaView PC software (for data download, analysis & report writing)	Standard

 Distributed By : www.ralali.com ,Distributor, Agen Alat Ukur Listrik

Read More

Fluke 345 Power Quality Clamp Meters

Fluke 345 Power Quality Clamp Meter

DESCRIPTION

---

This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads.

With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for troubleshooting power quality on switching loads. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit with the power meter. The internal memory of the power analyzer enables long-term power quality logging for analysis of trends or intermittent problems.

APPLICATIONS

---

• Setup and troubleshoot variable frequency drives and UPS systems - Verify correct operation by measuring key power quality parameters
• Harmonics measurements - Uncover harmonic issues that can damage or disrupt critical equipment
• Inrush capture - Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
• Load studies - Verify electrical system capacity before adding loads

FEATURES

• AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
• Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance
• Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter
• Data logging: Identify intermittent faults by logging any power quality parameter for minutes, or over a month, including harmonics
• Verify batteries: Direct measurement of dc ripple (%) for battery and dc systems
• Troubleshoot harmonics: Analyze and log harmonics digitally or graphically
• Inrush current: Capture and analyze nuisance tripping, from 3 seconds to 300 seconds
• Easy to use: Easily confirm power meter setup with large backlit color display of waveforms and trends
• 3-Phase power: Built in capability for balanced loads
• View graphs and generate reports: Use power analyzer with included Power Log software

GENERAL SPESIFICATIONS

Reference conditions	All accuracies stated at 23˚C ± 1˚C (73.4 °F ± 1.8 °F)
Operating temperature	0 °C to 50 °C (32 °F to 122 °F)
Temperature coefficient of current	≤ ± 0.15 % of rdg per °C
Temperature coefficient of voltage	≤ ± 0.15 % of rdg per °C
Maximum relative humidity	80 % for temperatures up to 31 °C (87 °F) decreasing linearly to 50 % relative humidity at 40 °C (104 °F)
Maximum operating altitude	2000 m
Measuring range	0 to 2000 A dc or 1400 ac rms
Autorange facility	40 A / 400 A / 2000 A
Resolution	10 mA in 40 A range 100 mA in 400 A range 1 A in 2000 A range
Accuracy: DC and dc rms	I > 10 A: ± 1.5 % rdg ± 5 digits I < 10 A: ± 0.2 A
Accuracy: AVG	I > 10 A: ± 3 % rdg ± 5 digits I < 10 A: ± 0.5 A
Accuracy: Pk	I > 10 A: ± 5 % rdg ± 5 digits I < 10 A: ± 0.5 A
Accuracy: AHr	I > 10 A: ± 2 % rdg ± 5 digits I < 10 A: ± 0.5 AHr
Accuracy: CF (Crest Factor)	1.1 ≤ CF < 3: ± 3 % rdg ± 5 digits 3 ≤ CF < 5: ± 5 % rdg ± 5 digits Resolution: 0.01
Accuracy: RPL (Ripple)	2 % ≤ RPL < 100 %: ± 3 % rdg ± 5 digits 100 % ≤ RPL < 600 %: ± 5 % rdg ± 5 digits Resolution: 0.1 % Idc > 5 A, Iac > 2 A

 Distributed By : www.ralali,com Agen FLUKE Indonesia 

Read More

Fluke 355 / 353 True-rms 2000 A Clamp Meters

Fluke 355 dan 353 True-rms 2000 A Clamp Meters

DESCRIPTION

---

Versatile and rugged tools for applications with high currentsConfidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters; the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.

FEATURES

• Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)
• Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. (355 only)
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

GENERAL SPESIFICATIONS

Batteries	Six 1.5 V AA NEDA 15 A or IEC LR6
Battery life (with typical usage, backlight off)	100 hours
Test leads	Rated to 1000 V
Weight	.814 kg (1.8 lb)
Jaw size	58 mm (2.28 in)
Dimensions (LxWxD)	300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
Safety rating	IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III

Distributed By : www.ralali,com , Distributor agen FLUKE Indonesia

Read More