Multimeter Fluke 27 II/28 II Industrial

Multimeter Fluke 27 II/28 II Industrial

Lihat lainnya di www.ralali.com

Description

---

The NEW standard for ruggedThe NEW digital multimeters Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.

FEATURES

• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically
• Peak min-max (28 II)
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II)

SPESIFICATIONS

Accuracy specifications
DC voltage	Range 0.1 mV to 1000 V Accuracy 27-II:0.1 % +1 28-II:0.05 % + 1
AC voltage	Range 0.1 mV to 1000 V Accuracy 27-II: 0.5 % +3 28-II: 0.7 % +4
DC current	Range 0.1 μA to 10 A Accuracy 27-II: 0.2 % + 4 28-II: 0.2 % + 4
AC current	Range 0.1 μA to 10 A Accuracy 27-II: 1.5 % + 2 28-II: 1.0 % + 2
Resistance	Range 0.1 Ω to 50 MΩ
Display counts	27-II 6000 28-II 6000/19,999
Capacitance	1 nF to 9999 μF
Frequency	0.5 Hz to 199.99 kHz
Temperature	27-II: N/A 28-II: -200 °C to +1090 °C
Low pass filter (Measurement on VSD’s)	27-II: N/A 28-II: Yes
Compliance	CAT IV 600 V , CAT III 1000V
IP rating	27-II: IP 67 28-II: IP 67
Power	Three AA batteries
Battery life	800 hours

General specifications
Display	Bar graph/backlight Yes/Yes
Data storage	Peak transient capture 250 μS (28 II) Min/Max/Avg Yes Reading hold Yes
Other features	Relative readings (zero) Yes Battery type Three AA batteries
Warranty and protection	Safety rating CAT IV 600 V/CAT III 1000 V External protection Rubber holster Drop test 10 feet drop test Dustproof/waterproof Yes, IP 67 rated Warranty Limited lifetime Size (HxWxL) with holster 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in) Weight with holster 698.5 g (1.54 lb)

Distributed By : www.ralali.com ,Distributor FLUKE Indonesia

Posted in: clamp meter, dealer fluke, fluke 27II/28II, fluke electrical test, fluke price, fluke thermal imager, harga fluke